RC-80ND Makes Micro-Cracked Nickel/Chrome Plated Parts Pressure-Tight

Benefits: 

• High Temperature Resistance
• High Chemical Resistance
• Impregnates All Nickel Chrome Coatings
• Cost-Effective
• Stable
• Certified to MIL-I-17563C
• No Unpleasant Odors
• Water Washable

For  Specialized Applications, RC-80ND Can Save You Time, Money, and Improve Ni/Cr Coating Quality

Formulated Specifically for Micro-Cracked Nickel Chrome Impregnation

RC-80ND is a specially formulated Two-Part thermo-setting resin designed for the impregnation of all types Parts with Micro-Cracked Nickel/Chrome Coatings.  RC-80ND is a result of IMPCO's ongoing research and development efforts to provide users with a superior sealing impregnating resin with outstanding physical and chemical resistance properties.  Cured, RC-80ND impregnating resin is resistant to fuels, oils, alcohols, glycols, solvents, salts, mild acids and freons, and  has excellent dielectric properties. 

The low viscosity and high polarity of RC-80ND impregnating resin ensure deep penetration, low materials consumption and a lower impregnating cost per unit.  Its inherent flexibility provides excellent pressure and temperature resistance, as well as high resistance to physical and thermal shock.

Operating Economies and Problem Free Cure

RC-80ND is easily cleaned and rinsed from the part surface.  Parts processed with RC-80ND come out clean, completely cured, and "job ready" for immediate testing or use. 

Water Washable

RC-80ND is biodegradable and washes in plain water.

Impregnated Micro-Cracked Nickel Chrome Parts Exhibit

Complete Pressure Tight Seals With Proof of Cure

Operating Economies and Problem-Free Cure

The low viscosity and high polarity of RC-80ND ensure deep penetration, low materials consumption and a lower impregnating cost per unit.  Its inherent flexibility provides excellent pressure and temperature resistance, as well as high resistance to physical and thermal shock.

RC-80ND is designed and formulated for short cycle operations of 10 to 20 minutes.  It is easily cleaned and rinsed from the part surface.  Parts processed with RC-80ND come out clean, completely cured, and "job ready" for immediate testing or use.  Overall part quality is improved virtually eliminating bleedout problems on the part surface.

No Special Storage Requirements

RC-80ND is an extremely stable resin requiring no expensive refrigeration or aeration.  It is stored and used at room temperature (68-72°F / 20-22°C).  The remarkable stability of RC-80ND allows for virtually indefinite pot life with proper care and management.

Water Washable

RC-80ND is biodegradable and washes in plain water.

* Range may be greater.

Consult IMPCO for your specific requirements.

"Speak with an Impregnating Resin Specialist"