| RC-80ND™ Impregnating Resin
Two-Part Impregnating Resin For Metal Castings Provides High Resistance to Temperature and Chemicals
Benefits:
Formulated Specifically for Castings Impregnation
RC-80ND is a specially formulated Two-Part thermo-setting resin designed for the impregnation of all types of micro- and macro-porous, ferrous and non-ferrous alloy castings as well as other metal and non-metal parts. RC-80ND is a result of IMPCO's ongoing research and development efforts to provide users with a superior sealing impregnating resin with outstanding physical and chemical resistance properties. Cured, RC-80ND impregnating resin is resistant to fuels, oils, alcohols, glycols, solvents, salts, mild acids and freons. And it has excellent dielectric properties. RC-80ND is uninhibited by copper based alloys.
Operating Economies and Problem-Free Cure
The low viscosity and high polarity of RC-80ND impregnating resin ensure deep penetration, low materials consumption and a lower impregnating cost per unit. Its inherent flexibility provides excellent pressure and temperature resistance, as well as high resistance to physical and thermal shock.
Water Washable
RC-80ND is biodegradable and washes in plain water.
Features and Specifications Curing temperature range 200°F ± 5°F / 95°C ± 2°C Operating temperature range -65 to 350°F / -55 to 176°C Intermittent operating temperature range* -80 to 450°F / -62 to 232°C Max. tested pressure resistance Maximum Casting Pressure Rating Flashpoint >200°F / 95°C Typical Applications Valves Weldments Electrical & Electronic Components Water & Fuel Pumps Gas & Steam Fittings Plastic Molds Hydraulic Systems Gear Housings Fuel Systems Meters Engines Carburetors Compressors Powdered Metal Parts Refrigeration Components Brake Systems Pneumatic Systems Ceramic Parts Carbon & Metal Seals Builder’s Hardware Wired Parts Transmission Cases Wood
* Range may be greater. Consult IMPCO for your specific requirements.
"Speak with an impregnating Resin Specialist"
| ||||||||||||||||||
High Temperature Resistance
RC-80ND impregnating resin is designed and formulated for short cycle operations of 10 to 20 minutes. It is easily cleaned and rinsed from the part surface. Parts processed with RC-80ND come out clean, completely cured, and "job ready" for immediate testing or use. Overall part quality is improved through the virtual elimination of bleedout problems on the part surface.