The Turnkey Resin Recovery System A Simple, Safe and Cost-Effective Three Step Process
Stage One

The RT Unit is filled with effluent. The turbine mixer is

started and DR Reactant is added. After (5) minutes of

mixing a large floc will form. The mixer is then stopped

and settling of the floc to the bottom of the tank occurs,

usually in a couple of minutes.

Stage Two

Once the settling, or phasing, of the floc has occurred,

draining and filtering begins. Clarified water from the

upper area of the tank is drained first, followed by the

floc (sludge). Filter media captures the solids, allowing

the clarified water through to a clean compartment. A

discharge pump automatically transfers the fluids to

sewer or recycling vessel.

Stage Three

An automated conveyor advances the filter media and sludge as needed. This usually requires only (5) feet of filter media. An included self-tipping sludge gondola captures the filter media and sludge for disposal. The sludge dries to a cake, without need of a filter press. The process is now complete. The water will pass local discharge limits, and the sludge will pass TCLP.