All of our sealant formulations are easy to use, stable and adaptable to a wide range of impregnation methods. They also meet the latest U.S. and military, industrial, and other federal, state and local government standards as well as most International standards. All Impco, Inc. sealants are in full compliance with RoHS and REACH regulations.
Choose the application link below for specific sealant information.
 | Impregnating Sealants for Metal Castings
IMPCO sealants offer the ability to impregnate metal castings and even large metal castings. We offer two specific sealants that can be used... |
 | Impregnating Sealants
for Powdered or Sintered Metal Parts
IMPCO offers two sealants for Powdered Metal parts. They provide the characteristics needed to assure your parts receive complete fills and proof of cure. Parts impregnated with IMPCO Powder Metal Impregnating Resins exhibit excellent machinability, plate and paint without salt-out and fill and cure completely. |
| AlumiSeal™
AlumiSeal™ is a high-performance brush-on methacrylate compound for sealing porosity in aluminum parts and welds that will contain liquids or gases under pressure. |
 | CastSeal™
CastSeal™ is a high-performance methacrylate formulated for sealing porosity in cast iron parts that will contain liquid or gas under pressure. |
 | WeldSeal™
WeldSeal™ is a high-performance methacrylate formulated for sealing porosity in welds that will contain liquid or gas under pressure. |
 | Sealants For Gross (Visible) Porosity
IMSEAL-800 macro-porosity resin is a low viscosity modified two-part epoxy solution for filling blowholes, cracks, surface defects and macro-porosity on iron, aluminum, brass, and other metal castings and parts. |
 | Sealants for Electronic Components-
The Ideal Solution for Corrosion Control
Specially formulated to maintain flexablity when cured, PolyFlex 140 is the perfect anaerobic sealant for electronic connectors. Its flexable nature will maintain a seal... |
| POLYFLEX FR
IMPCO introduces Polyflex FR, the first true fire-resistant impregnation resin available for sealing electronic connectors, wires, and wiring assemblies against corrosion. |
 | Sealants for Ceramic Parts
A water washable polyester-methacrylate resin with excellent sealing capabilities. Provides for a slightly higher temperature and chemical resistance and is good for all metals. |
 | Sealants For Impregnating
Micro-Cracked Nickel/Chrome
A water washable polyester-methacrylate resin with excellent sealing capabilities. Provides for a slightly higher temperature and chemical resistance and is good for all metals. |
IMPCO manufactures a complete line of anaerobic and thermoset sealants for filling micro and macro porosity in metal castings, powdered metal parts, electrical connectors and ceramic parts. Sealants are formulated using methacrylate and polyester monomers that cure to form a solid thermoplastic resin that is resistant to strong acids, strong alkalies, solvents, gasoline, refrigerants, oil, antifreeze, transmission fluids, power steering fluids, hydraulic oils and others.